Vui lòng dùng định danh này để trích dẫn hoặc liên kết đến tài liệu này:
http://thuvienso.dut.udn.vn/handle/DUT/4108| Trường DC | Giá trị | Ngôn ngữ |
|---|---|---|
| dc.contributor.advisor | Nguyen, Le Hoa, Dr. | |
| dc.contributor.author | Dinh, Ngoc Tien | |
| dc.contributor.author | Tran, Viet Tu | |
| dc.contributor.author | Pham, Tien Vu | |
| dc.date.accessioned | 2024-11-06T05:19:57Z | - |
| dc.date.available | 2024-11-06T05:19:57Z | - |
| dc.date.issued | 2020 | |
| dc.identifier.uri | http://thuvienso.dut.udn.vn/handle/DUT/4108 | - |
| dc.description | DA.FA.20.016 ; 51 p. | vi |
| dc.description.tableofcontents | Production and living electricity systems use many sensor devices such as motors, transformers, etc., which not only consume useful power (P (kW) = S * Cosφ) but also consume a large amount of useless power (Q (kVAr) = S * Sinφ), causing damage to the electrical system. Where φ (pronounced phi) is the phase angle between current and voltage. The reactive power component makes the total transmission capacity on the line increase, causing losses, overload, pressure drop, .... The greater the reactive power, the smaller Cosφ. The Electricity Industry stipulates cosφ must be at the lowest level of 0.9. If the cosine is below 0.9, the electricity user will be fined to buy reactive power. Therefore, the research on the cosφ factor compensation is necessary. The inverter circuits have many operating modes such as harmonic control, Micro Grids, Grid Storage, Active Rectifier. In this project we carry out research in VAR mode. The circuit has features: 380-DC VIN, 110 VRMS, 60 Hz, 400-VA Max Output, 20-kHz Switching, but we reduced all parameters to 10 times to be suitable for the research. The project is tested on 2 levels of testing (open loop and close current loop), the obtained resuls is generate sine wave with increasing mesh cosφ. | vi |
| dc.language.iso | en | vi |
| dc.publisher | Trường Đại học Bách khoa - Đại học Đà Nẵng | vi |
| dc.subject | Statcom | vi |
| dc.subject | Reactive power | vi |
| dc.subject | Reactive power compensation | vi |
| dc.title | Design and implementation of statcom for reactive power compensation | vi |
| dc.type | Đồ án | vi |
| item.grantfulltext | reserved | - |
| item.languageiso639-1 | en | - |
| item.openairetype | Đồ án | - |
| item.openairecristype | http://purl.org/coar/resource_type/c_18cf | - |
| item.fulltext | Có toàn văn | - |
| item.cerifentitytype | Publications | - |
| Bộ sưu tập: | Khoa Khoa học Công nghệ tiên tiến - Điện tử Viễn thông | |
Các tập tin trong tài liệu này:
| Tập tin | Mô tả | Kích thước | Định dạng | Đã có tài khoản, vui lòng Đăng nhập |
|---|---|---|---|---|
| 7.DA.FA.20.016.DinhNgocTien.pdf | Thuyết minh | 9.51 MB | Adobe PDF |
Các đề xuất từ CORE
Lượt xem 10
49
đã cập nhật vào 30-01-2026
Lượt tải xuống 20
13
đã cập nhật vào 30-01-2026
Google Scholar TM
Kiểm tra...
Khi sử dụng các tài liệu trong Hệ thống quản lý thông tin nghiên cứu phải tuân thủ Luật bản quyền.